HOME ABOUT US PRODUCTS NEWS TECHNICAL SUPPORT CONTACT US  

Product Center
 Cold material
 Series diamond products
 Series polishing powder
 Series adhesives used in optical technology and product
 Optical coolant（oil）
 Series polyurethane polishing pellets
 Vacuum coating material
 Series cleaning agent
 Adhesives for product assembly
 Series cleaning material
 Series special coating and protective material
 Series optical damp (lubricating) grease
 Adhesives for product assembly
 Optical Instruments
 Adjustable low light level resolution checker WFJ1
 Preset lens for distortion checking WL535j – 5
 Collimator with big field of view BJ – 041B
 Objective T value checker TCY
 Optical instrumentation

 
      LOCATION： HomeProduct CenterSeries adhesives used in optical technology and productGMJ – 01 – 1 single component photosensitive adhesive
Name：GMJ – 01 – 1 single component photosensitive adhesive
Technical parameters：
It is a single liquid hardening adhesive made of
 imported material combined with TGA technology. 
It is featured for strong adherence, good 
flexibility, high transmission, weak smell,
 narrow photosensitive area, easy storage. It
 can be used for quick bonding between 
transparent materials (except  a 
polytetrafluoroethylene plastic) and other 
materials (except polytetrafluoroethylene
 plastic). It is suitable for optical cementing 
after centering by machine or instrument. 
Details：

Specification

S.N.
Item
Specification
1
State
Colorless transparent thick liquid
2
Refractive index n 20D
1.47 – 1.55
3
Sensitive (hardening ) wavelength
Below 320nm
4
Adhesion strength kg/cm2
≥90
5
Transmissivity at visible light
≥90%
6
Cleanliness
It is allowed to have dust particles or fiber not more that 10 pieces in 5cm3 glue
7
Water resistance
The glue layer remains unchanged after immersion at room temperature for 24 hours.
8
Solvent ( acetone) resistance
The glue layer remains unchanged after immersion at room temperature for 4 hours.
9
High and low temperature performance
The glue layer remains unchanged at temperature of 80℃ for 2 hours.
The glue layer remains unchanged at temperature of -40℃ for 2 hours.
10
Temperature shock performance
The glue layer remains unchanged at temperature of 55℃ and -35℃, cycling 3 times, 1 hour for each time..
11
Shock performance
When dropping form 2 meters to the cement floor, lenses are broken, but glue layer remains unchanged..

 
 
Copyright:Yunnan Opto-Electro Auxiliary Material Co.,Ltd
Address:beijing  E-mail:
Phone:0871-68593568  Fax:0871-68590607  Technical Support:NEWFULCRUM