Specification
|
Outer diameter |
Shape |
Granularity |
|
≤Φ 200 |
Made according to draw. |
Made as required |
Mark: The size of positioning hole, outer diameter D of grinding surface, width T,
beveling height and angle and transition arc shall be indicated.
For example: 165D*4T*0.5A*C 135º 3.7A ( 0.2R+3.1A*90º +0.4R) It means that the outer diameter of the working surface of the grinding wheel is 165mm, width of cylinder is 4mm, bevel vertical height at one side is 0.5mm, it forms an angle of 135º with working surface. The bevel vertical height at the other side is 3.7mm, it is connected to base level by R02 arc. In the middle is a right angle side with a height of 3.1mm, forming a angle of 90º with base level, It is connected to non-working side of the grinding wheel by R0.4 arc at la |
LOCATION： Home
Product Center
