Specification
Diameter Φ (mm) 2 – 350
Height of working layer (mm) 7 – 10
Bond
|
Type |
S.N. |
Materials suitable for grinding |
|
Metal |
TN0284 |
Aspheric optics |
|
TN0211 |
Sapphire and hard material like micro crystal etc. |
|
323 |
Normal optical glass |
|
323 – D |
Optical glass beveling |
|
Resin |
TS0401 |
Suitable for rough grinding of optics with high surface quality requirement. |
Mark: The information of bond type, geometric size and granularity of the grinder must be described in the mark. A drawing should be attached for the base. The Type of the thread, size and taper of the setting hole should be shown on the drawing. The main sizes should be shown in the following way:
|
LOCATION： Home
Product Center
